ZANSKAR HOTSPRING HSTB9 Manual Download Page 9

 

HERE ARE SOME SAFETY 

PRECAUTIONS

To follow while installing or operating the appliance, in order to 
avoid unforeseen hazard or damage to the product, which in 
turn may harm the person operating it.

• The installation must be in compliance with your local electrical and plumbing codes.

• This appliance must be EARTHED.

• All wiring and installation must be supervised by a qualified electrician.

• This appliance can be used by children aged from 8 years and above, and is also suitable for 

persons with reduced physical, sensory or mental capabilities or lack of experience and 

knowledge. Provided that they have been given apt supervision or instruction concerning use of 

the appliance in a safe way and non- hazardous manner. Children should not play with the 

appliance. Cleaning and user maintenance should not be carried out by children without apt

supervision.

• This appliance MUST be permanently connected to the fixed circuit breaker and its 

recommended to be installed vertically.

• DO NOT install this appliance near to tinder or a strong magnetic field location.

• Do not switch on the water heater if there is a possibility that the water in the heater is frozen. 

As this could result in serious damage to the appliance. Wait until you are sure that the frozen 

water has completely thawed, and drained out, before you switch on the water heater.

• Please feel the outlet hot water temperature with your hand to make sure it is suitable for use, 

to avoid scalding.

• Before connecting the pipes to the water heater hoses, it is extremely important to FLUSH the 

pipes to wash away all plumbing paste or residue present inside.

• If there is damage to the wire, you must contact a qualified electrician to replace it.

• The shower head should be cleaned and descaled periodically.

• The regulation valve at the water inlet should work periodically in order to remove calcium 

carbonate deposits.

• The drain-pipe connected to the water relief valve should be installed in a continuous 

downward manner in frostless environment.

• The spray head must be descaled regularly.

6

Summary of Contents for HOTSPRING HSTB9




















Reviews: