50
GB
Handling the appliance
Putting it into use
Place the accessories into the refrigerator then plug to
the mains socket. To start cooling turn the control dial
on the right-hand side of the fresh food compartment
from "0" clockwise according to the figure. In "0"
position the appliance is out of operation.
The next paragraph will give instructions for setting.
Controlling the temperature, setting
The thermostatic controller interrupts the operation of
the appliance automatically for more or less time
depending on the setting then restarts it assuring the
required temperature.
Turning the control button towards the bigger numbers
cooling becomes more and more intensive.
Setting the knob of the thermostatic control to 3 the
temperature starting automatically in the fresh food
compartment is about +5°C or below. The 3 position
generally meets the requirements of everyday cooling.
The temperature coming about in the refrigerator is
effected by not only the position of the thermostatic
control but the ambient temperature, frequency of
door openings and the quantity of food put into it
newly, etc.
In the maximum i.e. 5 position - in case of
increased demand e.g. during heatwaves - the
compressor may operate continually. This does not
cause damages to the appliance.
Hints for storage
When placing the different kinds of food take into
consideration the sketch below in figure:
1. Confectionery, ready-cooked foods, foods in
dishes, fresh meat, cold cuts, drinks
2. Milk, dairy products, foods in dishes
3. Fruits, vegetables, salads
4. Cheese, butter
5. Eggs
6. Yoghurt, sour cream
7. Small bottles, soft drinks
8. Big bottles, drinks
Summary of Contents for ZKR 250 B
Page 15: ...59...
