ZANKER ZKI1415, User Manual

Page: 27 / 60

Malfunction Possible cause Possible solution
The water inlet hose is damaged. Make sure that the water inlet hose
has no damages.
The appliance does not drain the
water. There is a blockage in the sink spi-
got. Clean the sink spigot.
The connection of the water drain
hose is not correct. Make sure that the connection is
correct.
The water drain hose is damaged. Make sure that the water drain
hose has no damages.
The anti-flood device is on. Close the water tap and contact the
service centre.
The start of the washing pro-
gramme does not occur. The appliance door is open. Close the appliance door.
You did not press the start/cancel
button. Press the start/cancel button.
The mains plug is not connected in
the mains socket. Connect the mains plug.
The fuse in the fuse box is dam-
aged. Replace the fuse.
After the check, turn the programme knob on the same
washing programme before the malfunction occurred.
The programme continues from the point of interrup-
tion.
If the malfunction occurs again, contact the service cen-
tre.
If the different alarm codes show, contact the service
centre. The necessary information for the service centre is on
the rating plate.
Record this information:
– Model (MOD.) ........................................................
– Product number (PNC) ..........................................
– Serial number (S.N.) ..............................................
The washing results and drying results are not satisfactory
Problem Possible cause Possible solution
The dishes are not clean. The selected washing programme
was not applicable for the type of
load and soil. Make sure that the washing pro-
gramme is applicable for the type of
load and soil.
The baskets were not loaded cor-
rectly, water did not touch all surfa-
ces. Load the baskets correctly.
The spray arms could not turn free-
ly because of incorrect arrange-
ment of the load. Make sure that an incorrect ar-
rangement of the load does not
cause a blockage of the spray
arms.
27