3. Set function
and maximum temperature.
4. Run an empty oven for 15 minutes.
This is to burn off any residue from the cavity surface.
Accessories can become more hot than in normal use.
During this period an odour and smoke can be emitted.
This is normal. Make sure the airflow is sufficient.
Daily use
Warning!
Refer to "Safety information" chapter.
The display
1
2
3
1
Cooking function
2
Temperature
3
Time
Button
Function
Description
ON/OFF
To switch the appliance on or off.
SELECTOR
To set the oven function.
RAPID HEAT UP
To switch the rapid heat-up function on.
PYROLYTIC CLEANING
To start the Pyrolytic cleaning.
/
PLUS, MINUS
To adjust the values (temperature and time).
CLOCK
To set the clock function.
Setting the oven function
1
2
1. Push again and again until the symbol for the
necessary oven function flashes.
The display shows an automatic temperature. If
you do not change the temperature in approximate-
ly 5 seconds, the appliance starts to operate.
2. To change the temperature, push or button.
If there is a power cut, the programmer keeps all
the settings for approximately 3 minutes. After
more than 3 minutes without power supply, you have to
do the settings (also the time of day) again.
If you start an oven function, the symbol of the
temperature flashes.
The symbol shows that the temperature in the appli-
ance increases.
When the appliance is at the set temperature, an
acoustic signal sounds and the symbol of the tempera-
ture stops to flash.
23
