background image

53

Pull out the plug from the mains socket.
Tilt  back  the  appliance  carefully  being  careful  so

that  the  compressor  can  not  touch  the  floor.  It  is

recommended to ask another person for help, who

can keep the appliance at this position safely.
Unscrew the adjustable feet situated on both sides

(2 pieces), in addition the screws fixing the lower

door holders (3 pieces) respectively the screw on

the other side.
Put over the pin in the lower door holding plate in

the direction of the arrow.
Fix the plate on the other side leaving the position

of the door unchanged.
Then screw in the one screw in the place set free

on the other side as  well  as  the  adjustable  feet

(2 pieces) and set up the box.
For  refitting  the  upper  door  holder  take  out  the

screws (2 pieces) fixing the plastic top on the back

of the box.
Push  back  the  top  and  lift  it  from  the  fixing

elements.
Unscrew  the screws fixing the upper door holder

(2 pieces).
After  unscrewing  turn  over  the  pin  in  the  door

holder plate in the direction of the arrow.
Fit and fix the door holder plate on the other side

without displacing the door.
Put back the plastic top on the fixing elements and

pull it forward.
Fix the top with the screws (2 pieces) on the back

side of the box.
Put  over  the  handle  and  the  plastic  nails  on  the

other side.
Put the appliance to its place, set it level and plug it

into the mains socket.

In  case  you  do  not  want  to  perform  the  procedures

above,  call  the  nearest  brand-mark  service.

Technicians  will  accomplish  the  refitting  expertly  for

charge.

GB

Electrical connection

This refrigerator is designed to operate on a

230 V AC (~) 50 Hz supply.

The plug must be put into a socket with protective

contact. If there is no such, it is recommended to

get  an  electrician  to  fit  an  earthed  socket  in

compliance with standards near the refrigerator.

This  appliance  complies  with  the  following

E.E.C. Directives:

73/23  EEC  of  19.02.73  (Low  Voltage  Directive)

and subsequent modifications,
89/336  EEC    of    03.05.89    (Electromagnetic

Compatibility  Directive)  and  subsequent

modifications.

Summary of Contents for TT160A















Reviews: