ZANKER KOU65902XK, User Manual

Page: 21 / 52

Problem Possible cause Remedy
The lamp does not operate. The lamp is defective. Replace the lamp.
Steam and condensation settle on
the food and in the cavity of the
oven. You left the dish in the oven for too
long. Do not leave the dishes in the oven
for longer than 15 - 20 minutes after
the cooking process ends.
The display shows "12.00". There was a power cut. Reset the clock.
There is no good cooking perform-
ance using the True Fan Cooking
PLUS function. You did not activate the True Fan
Cooking PLUS function. Refer to "Activating the True Fan
Cooking PLUS function".
There is no good cooking perform-
ance using the True Fan Cooking
PLUS function. You did not fill the cavity emboss-
ment with water. Refer to "Activating the True Fan
Cooking PLUS function".
The water in the cavity embossment
does not boil. The temperature is too low. Set the temperature at least to 110
°C.
Refer to “Hints and tips” chapter.
The water comes out of the cavity
embossment. There is too much water in the cavi-
ty embossment. Deactivate the oven and make sure
that the appliance is cold. Wipe the
water with a cloth or sponge. Add
the correct amount of water to the
cavity embossment. Refer to the
specific procedure.
Service data
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of the
appliance cavity. Do not remove the rating plate from
the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Installation
Warning! Refer to Safety chapters.
21