1 2
3
Make sure that you put the glass panels (1, 2 and 3)
back in the correct sequence. The middle panel (2) has
a decorative frame. The screen-printing zone must face
the inner side of the door. Make sure that after the in-
stallation the surface of the glass panel frame (2) on
the screen-printing zones is not rough when you touch
it.
Make sure that you install the top panel in the seats
correctly.
What to do if…
Warning!
Refer to the Safety chapters.
Problem
Possible cause
Remedy
The oven does not heat up.
The appliance is deactivated.
Activate the appliance.
The oven does not heat up.
The clock is not set.
Set the clock. Refer to "Setting the
time of day".
The oven does not heat up.
The necessary settings are not set.
Make sure that the settings are cor-
rect.
The oven does not heat up.
The automatic switch-off is on.
Refer to "Automatic switch-off".
The oven does not heat up.
The Child Lock is on.
Refer to "Deactivating the Child
Lock".
The oven does not heat up.
The fuse in the fuse box is re-
leased.
Do a check of the fuse. If the fuse is
released more than one time, con-
tact a qualified electrician.
The oven lamp does not operate.
The oven lamp is defective.
Replace the oven lamp.
The Pyrolysis does not start. The
display shows
C1
.
The shelf supports are not re-
moved.
Remove the shelf supports.
The Pyrolysis does not start. The
display shows
C3
.
The door is not fully closed or the
door lock is defective.
Fully close the door.
18
