Residual heat indicator
Warning!
There is a risk of burns
from residual heat. The indicators show
the level of the residual heat for the
cooking zones you are currently using.
The indicators may also come on for the
neighbouring cooking zones even if you
are not using them.
The induction cooking zones produce the heat
necessary for the cooking process directly in the bottom
of the cookware. The glass ceramic is heated by the
heat of the cookware.
Daily use
Warning! Refer to Safety chapters.
Activating and deactivating
Touch
for 1 second to activate or deactivate the
hob.
Automatic Switch Off
The function deactivates the hob automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you activate the
hob,
• you spill something or put something on the control
panel for more than 10 seconds (a pan, a cloth,
etc.). An acoustic signal sounds and the hob
deactivates. Remove the object or clean the control
panel.
• the hob gets too hot (e.g. when a saucepan boils
dry). Let the cooking zone cool down before you use
the hob again.
• you use incorrect cookware. The symbol
comes
on and the cooking zone deactivates automatically
after 2 minutes.
• you do not deactivate a cooking zone or change the
heat setting. After some time
comes on and the
hob deactivates.
The relation between the heat setting and the time
after which the hob deactivates:
Heat setting
The hob deactivates af-
ter
, 1 - 2
6 hours
3 - 4
5 hours
5
4 hours
6 - 9
1.5 hour
The heat setting
Touch
to increase the heat setting. Touch
to
decrease the heat setting. Touch
and
at the
same time to deactivate the cooking zone.
Automatic Heat Up
If you activate this function you can get a necessary
heat setting in a shorter time. The function sets the
highest heat setting for some time and then decreases
to the correct heat setting.
To activate the function the cooking zone
must be cold.
To activate the function for a cooking zone: touch
(
comes on). Immediately touch
(
comes
on). Immediately touch
until the correct heat setting
comes on. After 3 seconds
comes on.
To deactivate the function: touch
.
PowerBoost
This function makes more power available to the
induction cooking zones. The function can be activated
for the induction cooking zone only for a limited period
of time. After this time the induction cooking zone
automatically sets back to the highest heat setting.
Refer to “Technical data” chapter.
To activate the function for a cooking zone: touch
.
comes on.
To deactivate the function: touch
or
.
Timer
Count Down Timer
You can use this function to set how long the cooking
zone should operate for a single cooking session.
22
Summary of Contents for KIT6460XXK
Page 59: ...59 ...
