Problem
Possible cause
Solution
The door is not closed correctly.
Refer to "Closing the door".
The food products' temperature is
too high.
Let the food products temperature de-
crease to room temperature before
storage.
Many food products are stored at
the same time.
Store less food products at the same
time.
The door has been opened often.
Open the door only if necessary.
If the advice does not lead to the desired
result, contact the nearest Authorised
Service Centre.
Replacing the lamp
Caution! Disconnect the plug from the
mains socket.
1. At the same time, with the fingers expand up and
down the transparent cover and unhook it in the
direction of the arrows.
1
2
1
2. Replace the lamp with one of the same power and
shape, specifically designed for household
appliances. (the maximum power is shown on the
light bulb cover).
3. Reassemble the lamp cover.
4. Connect the plug to the mains socket.
5. Open the door.
Make sure that the light comes on.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets.
Contact the Authorised Service Centre.
Installation
Positioning
This appliance can be installed in a dry, well ventilated
indoor where the ambient temperature corresponds to
the climate class indicated on the rating plate of the
appliance:
Climate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Some functional problems might occur
for some types of models when
operating outside of that range. The
correct operation can only be guaranteed
within the specified temperature range. If
you have any doubts regarding where to
install the appliance, please turn to the
vendor, to our customer service or to the
nearest Authorised Service Centre.
Electrical connection
• Before plugging in, ensure that the voltage and
frequency shown on the rating plate correspond to
your domestic power supply.
• The appliance must be earthed. The power supply
cable plug is provided with a contact for this
purpose. If the domestic power supply socket is not
19