TECHNICAL DATA
Charger (available accessory):
Input: 110 V-240V ~ (50/60 Hz), 400mA
Output: 2x (6V / 500 mA)
FIRST USE AND CHARGING THE POWERPACKS
Preparing the Charger:
Press the appropriate adapter into the slot on the back of the charger until it locks in with an
audible click.
Charging procedure:
Each Powerpack has an LED that shows the charge status (see table).
• LED on = charging
• LED blinking = charging complete (maintenance charging)
Important: First, connect the charger to the socket. Attach both
Powerpacks to the charging cable. The charging process begins
automatically (the corresponding LED turns on).
The Powerpacks are automatically monitored and turned off by the integrated electronics, regardless of
the charge status. After successful charging (max. 4.5 hours), the Powerpacks are automatically switched
to maintenance charging mode (the corresponding L ED will blink).
In case of an error, the charging process is automatically stopped after 5 hours.
Summary of Contents for HEAT-GX Supermax+
Page 1: ......
