10
/
13
adapter. The battery will be fully charged in about 3 hours. Please
make sure the battery is full for the first use.
2. Charge the mobile phone through the gimbal.
Please see the following diagram:
Caution
1) Remember, the USB charging port for mobile phone and type-C
charging port for the gimbal cannot be used in inverted.
2) Please turn off the gimbal before charging.
3) Battery care & replacement: If the battery is not cared for properly,
there may be an explosive risk. The battery should only be replaced
with the same specification battery.
IX Upgrading firmware
The gimbal can be upgraded by APP, and it will take
approximately 10 minutes to install. Please check the gimbal and
make sure the battery power is more than 50% before upgrading.
Then connect the gimbal to the APP, If the App prompts that you
can upgrade the firmware, please click accept. Do not exit the APP
upgrading interface during this process, and please pay attention