Zamil Cooline CDL Series, Installation, Operation & Maintenance Manual

Page: 3 / 20

2
GENERAL STATEMENT
Cooline CDL series is designed and built for the optimum performance when matched with the right indoor unit (Refer to
indoor unit catalog). However, it is required that you become well acquainted with good practices for the proper installa-
tion, operation, and maintenance procedures in order to ensure a safe trouble free operation, year after year.
Most of the procedures described in this manual require certain skills and experience. Only highly skilled and experi-
enced technicians should perform the installation and other maintenance procedures.
SAFETY ISSUES
There are three levels of safety hazards that are identified throughout this manual as Warning (where the situation will
result in personal injury), Caution (where personal injury might occur), and Attention (where minor personal injury and/or
property damage could happen). Please understand and respect those identifications.
WARNING:
These units operate on a high voltage with moving parts (at high speed) which can lead to
serious injuries and/or damage to the unit. Never attempt to service the unit unless the main electrical power
supply has been disconnected.
CAUTION:
Extra care should be observed when installing, test running, adjusting, servicing, or maintaining
the unit as the hazard of explosion, fire, electrical shock, and potential personal injury and property damage
are present.
When performing any task pertaining to the installation and maintenance of the unit, the skilled technician should observe
all the applicable safety measures (wear of safety helmet, boots, and goggles. Use of proper handling materials for
brazing and use of wet cloth for sequencing. A fire extinguisher should be easily accessible etc). He should also read all
the instructions and information in this manual prior to attempting to perform any installation or servicing of the unit.
All applicable local codes should be observed during installation and servicing.