Zamel VP-819B, Manual, Page: 46 / 48

All other displays in the system will display PUBLIC ADDRESS. You can now speak and be
received by other displays in the system. Touch
to exit the public address mode.
INTERNAL CALLS (DISPLAY-TO-DISPLAY INTERCOM MODE)
The intercom mode allows two-way voice calls between two specific displays in the video
entry phone system. Touch
on the display on standby to call another display in the
system. If you have more than 2 displays in the video entry phone system, choose the display
you wish to call with
or . Next, touch to confirm and make the call. The user
at the display being called can touch to answer the call or to reject the call.
DISPLAY SOUND VOLUME / BRIGHTNESS / COLOUR / CONTRAST / IMAGE TYPE
CONTROL
Touch or in the monitoring, incoming call, voice call, intercom, or public address
mode to open the sound volume menu. Next, touch to open the Volume / Brightness /
Colour / Contrast / Image Type menu. Operate the controls with or .
DO NOT DISTURB MODE
You can enable or disable the DO NOT DISTURB mode in the display System Settings
menu. Touch and hold
to enable or disable this mode.
DISPLAY MICROPHONE MONITORING
With the display on standby, touch and hold to start listening through the microphone of
another display in the voice entry phone system. If you have more than 2 displays in the
video entry phone system, choose the display you wish to listen to by touching
or
and confirm with .
Note:
a) The user of the display that is listening will hear everything that the microphone of the
display being listened to captures. The display being listened to will not output the
sounds captured by the microphone of the display which is listening.
b) If you have more than 2 displays in the video entry phone system, verify that the remote
listening mode is enabled in the display to which you want to listen. Go to System
Settings and verify that Can Be Monitored is set to Enable.