Zamel VP-817B, Manual, Page: 71 / 80

10
ANSWERING AN ENTRANCE PANEL CALL
When a visitor presses the Call button on the entrance panel, all connected indoor displays
will sound the call chime at the same time as displaying the INCOMING CALL message on
each display screen.
Touch the icon to answer the call. Touch again to send the calling entrance panel camera feed
to all other displays. If you touch before the call is switched by a user of another display in the system,
you will return to the calling visitor. If the call is not answered by the time the call chime stops, the display will
enter the standby mode. Touch the icon to release the electric catch of the calling entrance panel
during the call. The display will show DOOR OPEN. Touch and hold the icon for approx. 2 seconds to
open the gate. The display will show GATE OPEN.
If another user calls you during your call, the display will show
VISITOR AT DOOR 2. Touch the icon to answer and switch to the second call.
Note: Touch and hold the icon during an entrance call or an internal call
(display-to-display intercom mode) to mute your microphone. The display will show MUTE.
Touch and hold
again to unmute your microphone, which the display will confirm with
SPEAK. Operating a gate requires the NC06 gate control module in the system.
VIDEO FEED MONITORING
With the display on standby, touch to monitor the video feed from entrance panel no. 1.
Touch again to switch to the next video feed.
The CCTV camera video feeds can only be monitored this way if the Port 4 status is Enabled
(see Table SYSTEM SETTINGS, item 5). Touch
to start a voice call with the visitor at
the entrance panel from which you are monitoring the video feed. Touch to unlock the
door of the same entrance panel.
When monitoring the video feed from Door1/Door2/CCTV1/CCTV2, touch and hold to
change the screen aspect from 16:9 to 4:3.
PUBLIC ADDRESS MODE
The Public Address mode allows you to speak through all displays connected to the video
entry phone system. Touch and hold
with the display on standby or in the Main
Menu. The PUBLIC ADDRESS CALL message will be displayed.