15
Item
System functions
Options
Note
1
LANGUAGE
Selects the
display interface
language.
Choose the language:
PL, EN, DE, FR, RU
2
DO NOT DISTURB
ENABLE
The LED will flash if this mode is enabled.
DISABLE
The mode is disabled by default during
a call from an entrance panel,
display-to-display intercom (internal)
calls and the public address mode.
3
CAN BE MONITORED
ENABLE
This display can be monitored (listened
to) by other displays in the video entry
phone system if this option is set
to ENABLE.
DISABLE
The mode is disabled by default.
4
MONITOR UNLOCK
ENABLE
Touch
to unlock the electric catch
linked to the entrance panel. Touch
to open the gate linked to the entrance
panel.
DISABLE
When this function is disabled, touching
followed by
/
will open
the door or the gate linked to the
entrance panel.
5
PORT STATE
None / CCTV1 / CCTV1&2
6
DEVICE ADDRESS
Room 1 / 2 / 3 / 4
Choose ROOM 1 on the display that
should be the main (master) display
of the system. The setting will be yellow
if the same device address is set in two
displays in the video entry phone system.
7
RESTORE DEFAULT
ENTER
Restores the default factory settings
of this display.
8
FORMAT FLASH
ENTER
Formats the embedded flash memory
of this display.
9
FORMAT SD CARD
ENTER
Formats the microSD card installed
in the display.
10
COPY FILE TO SD CARD
ENTER
Copies all files from the embedded
flash memory to the microSD card
in the display.
11
AUTO CAPTURE QUANTITY
01, 02, 03
Automatically captures 1, 2 or 3 video
feed snapshots during a call from
an entrance panel.
12
AUTO LEAVING MESSAGE
ENABLE
The visitor calling with an entrance
panel can leave a voice message after
the Away-from-Home Reply and tone.
DISABLE
Disables this mode.
13
SCREENSAVER TIME
30 s, 1-3 min, 5, 10, 20, 30, 40, 50, 60 min
14
FIRMWARE VERSION
Displays the version of the firmware
installed on the display.
Switch the option setting with
.