Zamel VP-809B, Manual, Page: 76 / 80

15
DVR (DIGITAL VIDEO RECORDER)
Start the DVR mode by touching . Touch and to open the DVR mode
settings.
Automatic DVR operation:
Set DVR to Enable in the System Settings. DVR can record video sequences
from each entrance panel and CCTV camera connected to the video entry phone system.
If motion detection is enabled, the system will automatically record a video sequence up to 7 minutes long in
a cycle mode. The cycles of video sequence recording are 1 1 5 minutes. If a camera
detects movement in its field of view, its video feed will be recorded for 1 minute. Next, the video feed is
again scanned for motion. If there is no motion detected, the video feed recording stops. If there is motion
detected, the video feed will be recorded for another 1 minute. Next, the video feed is again scanned for
motion. If there is no motion detected, the video feed recording stops. If there is motion detected, the video
feed will be recorded for another 5 minutes and the recording then stops.
DVR will not work if the microSD card in the display has less than 2 GB capacity. The minimum
recommended capacity of the microSD card is 8 GB for the DVR to work smoothly. Set the Resolution to
640x480 for a high video quality.
If the Begin and End Times have the same setting values, DVR will record without interruption.
VIDEO SNAPSHOT CAPTURE SETTINGS
Functions:
Storage type Resolution Number of snapshots
Embedded flash
memory 640x480 / 320x240, as set in
Resolution 100 snapshots max.
microSD card 640x480 / 320x240, as set in
Resolution Depends on the microSD card capacity
DVR RECORDING SETTINGS
Functions:
microSD card
capacity Resolution Frame rate
2GB-32GB 640x480 / 320x240, as set in
Resolution 2/4/6/8/10, as set in Frame Rate