CONNECTION
APPLICATION
MOUNTING
1. Disconnect power supply by the phase
fuse, the circuit-breaker or the switch-
disconnector combined to the proper
circuit.
2. Check if there is no voltage on con-
nection cables by means of a special
measure equipment.
3. Connect the cables with the terminals in
accordance with the installing diagram.
4. Install SRP-03 device in installation ca-
ble box.
5. Switch on the power supply from the
mains.
Caution: connection of wired switches
(LOCAL/CENTRAL) is optional.
CENTRAL
LOCAL
Roller blinds control system realised by
means of wired roller blind controllers
SRP-01. One controller can be used for
one roller blind. Each of the controllers
has a local control push-button and
connected inputs of central control,
which allow to close or open a given
group of roller blinds by means of
SRP-03 device - central roller blinds
controller. SRP-03 is operated in a
wireless way by means of 8-channel
remote control P-256/8. Roller blinds
switches can not be equipped with
backlight.
RADIO TRANSMITTERS PROGRAMMING
RADIO TRANSMITTERS DELETION
OPERATION RANGE
Transmitter
SRP-03 Transmitter SRP-03
RNK-02
200 m
RNP-02
180 m
RNK-04
200 m
RNL-01
brak*
P-256/8
250 m
RTN-01
200 m
P-257/4 (2)
200 m
RCR-01
brak*
RNM-10
250 m
RTI-01
180 m
RNP-01
180 m
RXM-01
250 m
* 1-channel transmitters do not cooperate
with roller blind controllers.
CAUTION: The given range concerns open area - an
ideal condition without any natural or artificial obsta-
cles. If there are some obstacles between a trans-
mitter and a receiver, it is advisable to decrease the
range according to: wood and plaster: from 5 to 20
%, bricks: from 10 to 40 %, reinforced concrete: from
40 to 80 %, metal: from 90 to 100% , glass: from 10 to
20 %, Over- and underground medium and high elec-
trical power lines, radio and television transmitters,
GSM transmitters set close to a device system have
also a negative influence on the range.
Мес
тное
упр
ав
ление
Мес
тное
упр
ав
ление
Центр
альное
упр
ав
ление
An exemplary programming procedure of P-257/2 remote control. The procedure for the rest of radio EXTA FREE transmitters is analogous.
Press and release transmitter’s first
push-button (movement ). LED red
diode switches on (first signal pulsates,
next the signal is constant).
Press and release the second transmitter’s
push-button (movement ). LED red diode
switches on (signal pulsates) and then switches
off - THE TRANSMITTER IS ADDED.
Press PROG push-button of SRP-03 device
for a longer time until LED red diode switches on
(constant signal). Next release PROG push-button.
Press PROG push-button of SRP-03
device for a longer time.
After 5 seconds LED red diode switches on
(signal pulsates) and then it switches off.
Release the push-button in SRP-03 -
MEMORY IS DELETED.
WARRANTY CARD
There is 24 months guarantee on the product
1. ZAMEL provides a two-year warranty for its products.
2. The ZAMEL warranty does not cover: a) mechanical defects resulting from transport, loading / unloading or other circumstances
b) defects resulting from incorrect installation or operation of ZAMEL products; c) defects resulting from any changes made by CUS-
TOMERS or third parties, to products sold or equipment necessary for the correct operation of products sold; d) defects resulting
from force majeure or other aleatory events for which ZAMEL is not liable; e) power supply (batteries) to be equipped with a device
in the moment of sale (if they appear);
3. All complaints in relation to the warranty must be provided by the CUSTOMER in writing to the retailer after discovering a defect.;
4. ZAMEL will review complaints in accordance with existing regulations.;
5. The way a complaint is settled, e.g. replacement of the product, repair or refund, is left to the discretion of ZAMEL.
6. Guarantee does not exclude, does not limit, nor does it suspend the rights of the PURCHASER resulting from the discrepancy
between the goods and the contract.
Salesman stamp and signature, date of sale
