NOTES
INSTALLATION & CONNECTION
RELAY CAPACITY
1. Select the location where the device is to
be in-stalled.
2. Disconnect the supply circuit with a fuse,
an over current circuit breaker or an iso-
lator connected to the corresponding cir-
cuit.
3. Check the voltage-free status of the pow-
er cords with a suitable instrument.
4. Remove the transparent piece of the con-
nection terminal cover.
5. Remove the cable holder.
6. Connect the wires to the terminals ac-
cording to the connection diagram.
7. Reassemble the transparent cover of the
connec-tion terminals.
8. Fix the wires with the cable holder.
9. Adjust the circuit lighting time and light
intensity with the LUX and TIME poten-
tiometers.
10. Bend the metal springs and place the
sensor in the mounting hole of the sus-
pended ceiling or the mounting box.
11. When the springs are released, the de-
vice is automatically held in the mounting
hole.
12. Turn on the device supply voltage.
• Since the device uses changes in infrared
radiation caused by thermal changes in
the monitored area, it should not be in-
stalled:
- opposite objects with highly reflective
surfaces, such as mirrors,
- near sources of heat, such as heaters,
fireplaces, air-conditioning units, high-
power lighting, etc.,
- near objects that may move in the wind,
such as curtains, high plants, shrubs,
etc.
• The device should be installed approx.
2÷4 m high. Then the diameter of the
monitored area is approx. 6 m.
WARRANTY CARD
24-month commercial warranty
granted by the manufacturer
Seller’s stamp and signature with date of sale
1. ZAMEL Sp. z o.o. grants a 24-month warranty for the goods it sells.
2. The warranty granted by ZAMEL Sp. z o.o. does not cover:
a) mechanical damage caused by transport, loading/unloading or other circumstances,
b) any damage resulting from improper installation or use of the goods sold by ZAMEL Sp. z o.o.,
c) any damage resulting from any modifications made by the BUYER or any third party to the sold goods or to the equipment
required for the proper functioning of the sold goods,
d) damage caused by any force majeure event or another fortuitous event beyond any reasonable control of ZAMEL Sp. z o.o.
3. The BUYER shall report all warranty claims in writing at the point of sale or to ZAMEL Sp. z o.o.
4. ZAMEL Sp. z o.o. will examine each warranty claim as regulated by the applicable provisions of the Polish law.
5. The form of warranty claim resolution, i.e. replacement, repair or refund of the price of purchase, shall be decided upon by
ZAMEL Sp. z o.o.
6. This warranty does not exclude, limit or suspend any rights of the BUYER arising from the statutory or regulatory laws con-
cerning implied warranty for defects of sold goods.
1200 W
800 W
300 W
500 W
60 W
N
6 m
360°
2,2 ÷ 4 m
6 m
