background image

PIR 360° MOTION SENSOR FOR INSTALLATION

IN SUSPENDED CEILING MCR-07 

USER MANUAL

ZAMEL Sp. z o.o.

ul. Zielona 27, 43-200 Pszczyna, Poland

Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04

www.zamel.com, e-mail: [email protected]

plik: mcr-07_inst_ext_gb | modyfikacja: 14.05.2020

APPEARANCE

FEATURES

DESCRIPTION

NOTE

•  The detection angle is 360 degrees.
•  Device installation in suspended ceiling 

board.

•  Motion detection within approx. 5÷6 m 

from the sensor.

•  Lighting time setting from 10 seconds 

to 15 minutes.

•  Built-in lighting sensor tripping thresh-

old setting within 10÷2000 lux.

•  Low power consumption - below 0.5 W.

MCR-07 motion sensor is used for 

automatic control of lighting or any other 

electricity receiver. Its design is based on 

a state-of-the-art passive infrared sen-

sor (PIR). The device detects motion in 

the monitored area within the radius of 

approx. 5 m, 360° around the sensor. In 

addition, it checks the ambient lighting 

intensity condition. If the device detects 

motion and the lighting level is below 

the set value, the sensor will turn on the 

lighting, start measuring the set time and 

then turn off the lighting automatically. 

This way, the sensor ensures optimum 

control  of  energy  flow,  optimising  costs 

of illuminating passageways, toilets, util-

ity rooms, etc. The device design enables 

easy installation of the sensor directly in 

suspended ceiling and plasterboard.

Read this User Manual carefully before connecting and operating the device. The device must be installed by a qualified electrician. 

Connect this product to a single-phase power system according to applicable standards. See this Manual for the wiring instructions. The 

activities related to the installation, connection and adjustment should be performed by qualified electricians, familiar with the User Manual 

and functions of the device. Do not open or otherwise disassemble the product enclosure; otherwise the product warranty will be void and 

an electrocution hazard may occur. Prior to installing and wiring this product, make sure that the wiring to be connected is not live. The 

conditions and methods of transport, storage and operation of this product may affect its performance. Do not install the products if any of 

its components are missing, the product is damaged or deformed in any way. If any malfunctions are found, consult the manufacturer. The 

manufacturer is not be liable for any damage resulting from improper installation or operation of the device. Any repairs or modifications 

made independently will void the warranty. Since the technical data are subject to constant modifications, the Manufacturer reserves the 

right to change the product characteristics and introduce other design solutions for the device.

TECHNICAL DATA

Supply voltage: 230 V AC

Supply voltage frequency: 50 Hz

Motion detection angle: 360°

Maximum operating area: 6 m

Light switch time: 3 s ÷ 15 min

Time measurement accuracy: 10 s ±3 s - 15 min ±2min

Light sensor setting range: 3 ÷ 2000 lux

Permissible load:

Traditional lamps: 1200 W

Compact fluorescent lamps (CFL): 300 W

LED lamps: 60 W

Power consumption: <0,5 W

Installation height: 2-4m

Operating temperature: -20 ÷ +40 °C

Permissible humidity: < 93% RH

Dimensions: 75,6 x 76 mm

Weight: 0,5 kg

  Do not dispose of this device in the trash can 

with other waste! In order to avoid harmful 

effects on the environment and human health, 

store used device in specially designated 

places. Household electronic waste can be 

returned for free and in any amount to the 

collection point established for this purpose, and also to 

the shop when buying new equipment.

Strain relief

Mounting springs

Light switch

time adjustment

Light sensor

adjustment

Reviews: