VER. 001_31.03.2010
DIMENSIONS
MOUNTING, FUNCTIONING
1. Disconnect power supply by the
phase fuse, the circuit-breaker or
the switch- disconnector combined
to the proper circuit.
2. Check if there is no voltage on
connection cables of the twilight
switch cooperating with a light
sensor by means of a special
measure equipment.
3. Unscrew the cover.
4 Put the installation cables through
rubber gland.
5. Fasten the SOS-01 device to the
base by means of screws.
6. Connect the cables with the termi
-
nals in accordance with the instal
-
ling diagram.
7. Tighten the cover screws.
8. Switch on the power supply from
the mains for the twilight switch.
The device is ready to work after
correct mounting and connecting. Ad
-
just demanded switch on time on the
twilight switch cooperating with the
SOS-01 light sensor. (WZM-01, WZM-
02, WZH-01, WZN-01 produced by
ZAMEL).
CONNECTION
APPLICATION
Typical application:
SOS-01 light sensor in cooperation with WZM-02 twilight switch operating light control functions
(e.g. garden lighting). The light sensor should not be installed in a place directly illuminated by
lamps.
LIGHT
SENSOR
LIGHT
SENSOR
68
84
43
Ø
3
52
Luminous flux
density
200 lx
35 lx
20 lx
2 lx
Potentiometer
adjustment
min.
max.
☼
min.
max.
☼
min.
max.
☼
min.
max.
☼
SENSOR FAMILY
Sensor:
Cable length:
SOH-01
1 m
SOH-03
3 m
SOH-05
5 m
SOS-01
none
WARRANTY CARD
There is 24 months guarantee on the product
Salesman stamp and signature, date of sale
1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product.
2. The manufacturer’s guarantee does not cover any of the following actions:
a) mechanical damage during transport, loading / unloading or under other circumstances,
b) damage caused by incorrect product mounting or misuse,
c) damage caused by unauthorised modifications made by the PURCHASER or any third parties to the product or any other devices
needed for the product functioning,
d) damage caused by Act of God or any other incidents independent of the manufacturer.
3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J.
4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation.
5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return.
6. The manufacturer’s guarantee is valid in the Republic of Poland.
7. The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or
otherwise are not affected by this warranty.
