APPLICATION
CONNECTIONS
TIME DIAGRAMS
LOAD
PRODUCT FAMILY
The PBP-01 bistable relay is a member
of the PBX product family.
Typical assembly exam
-
ple with the PBP-01 bi
-
stable relay. A single pole
bell-push is applied in the
unit.
ASSEMBLY, OPERATION
CASING DIMENSIONS
UNIT DIAGRAM
1. Disconnect the electric network
by means of an appropriate cut-off,
current-limiting circuit-breaker or
separator.
2. Check if there is no any voltage
between power leads by means of
an appropriate gauge.
3. Mount the PBP-01 module in the 60
mm junction box.
4. Connect wires according to the
electrical diagram.
5. Connect power supply circuit.
The unit is designed for lighting con
-
trol of up to 350 W. A single pole push
button is used for lighting control. If nee
-
ded, it is possible to connect the push
buttons in parallel and control the lights
from various places. The push button
pressing causes the light switching ON /
OFF alternatively. When the light bulbs
are OFF, pressing the push button cau
-
ses soft switching ON the light (0.8 s).
The soft start elongates the bulbs life.
The ligh is OFF softly, too (0.8 s).
μC
bro
w
n
red
bl
a
c
k
bro
w
n
red
bl
a
c
k
24 V AC/DC supply version
available for PMB-01,
PMB-02, PMB-03
Device version:
01 – basic
02 – extended:
SET, RESET
functions and state storage
03 – with time limit function
Casing type:
M –single-module
P – for junction box
Device type
WARRANTY
The product warranty is for a period of 24 months
Dealer signature & stamp, purchase date
1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product.
2. The manufacturer’s guarantee does not cover any of the following actions:
a) mechanical damage during transport, loading / unloading or under other circumstances,
b) damage caused by incorrect product mounting or misuse,
c) damage caused by unauthorised modifications made by the PURCHASER or any third parties to the product or any other devices
needed for the product functioning,
d) damage caused by Act of God or any other incidents independent of the manufacturer.
3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J.
4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation.
5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return.
6. The manufacturer’s guarantee is valid in the Republic of Poland.
7. The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or
otherwise are not affected by this warranty.
