APPLICATION
ASSEMBLY, OPERATION
CASING DIMENSIONS
UNIT DIAGRAM
1. Disconnect the electric network by means
of an appropriate cut-off, current-limiting
circuit-breaker or a separator.
2. Check if there is no any voltage between
power leads.
3. Mount the PBP-03 device in the 60 mm
junction box.
4. Connect wires accordingly to electrical
diagram.
5. Connect power supply circuit.
The unit is designed for lighting control of
power up to 350 W. A single pole push button
is used for the light control. If needed, it is po
-
ssible to connect the push buttons in parallel
and control the lights from various places. The
push button pressing causes the light switching
ON / ONN alternatively. When the light bulbs
are OFF, pressing the push button causes soft
switching ON the light (0.8 s). The soft start
elongates the bulbs life. There are two ways of
the light switching-OFF: – successive pressing
the push button, – waiting until the preset time
is over (automatic). The ligh is OFF softly, too
(0.8 s).
CONNECTIONS
TIME DIAGRAMS
LOAD
PRODUCT FAMILY
The PBP-03 bistable relay is a member
of the PBX product family.
A typical assembly exam
-
ple with the PBP-03 bi
-
stable relay with time limit
function.
A single pole bell-push is
applied in the unit.
μC
t
t
bro
w
n
red
bl
a
c
k
brą
z
o
w
y
c
z
er
w
ony
c
za
rny
24 V AC/DC supply version
available for PMB-01,
PMB-02, PMB-03
Device version:
01 – basic
02 – extended:
SET, RESET
functions and state storage
03 – with time limit function
Casing type:
M –single-module
P – for junction box
Device type
WARRANTY
The product warranty is for a period of 24 months
Dealer signature & stamp, purchase date
1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product.
2. The manufacturer’s guarantee does not cover any of the following actions:
a) mechanical damage during transport, loading / unloading or under other circumstances,
b) damage caused by incorrect product mounting or misuse,
c) damage caused by unauthorised modifications made by the PURCHASER or any third parties to the product or any other devices
needed for the product functioning,
d) damage caused by Act of God or any other incidents independent of the manufacturer.
3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J.
4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation.
5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return.
6. The manufacturer’s guarantee is valid in the Republic of Poland.
7. The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or
otherwise are not affected by this warranty.