36-CHANNEL REMOTE
P-456/36
TECHNICAL DATA
Nominal supply voltage:
3 VDC
Battery type:
1 x CR2032
Operating range:
up to 350 m in the open area
Transmission:
ISM band 868,50 MHz
Cooperation:
only with exta life system elements
Transmission way:
one-way 9600 bps
Coding:
algorithm based on 128-bit key
Number of channels:
36
Signalling of battery discharge /
transmission:
green LEDs (LED ring)
Battery life:
3 ÷ 5 years (depending on use and
operating conditions)
Operating temperature range:
-10 ÷ +55
o
C
Casing protection degree:
IP20
Protection class:
III
Dimensions:
152 x 43 x 17,5 mm
Weight:
0,06 kg
Reference standards:
PN-ETSI EN 300 220-1,
PN-ETSI EN 300 220-2
DESCRIPTION
The P-456/36 remote control enables wireless operation of EXTA LIFE system
receivers. The remote control can turn lights on and off and operate the light
dimmer function. The large number of control channels makes the product per-
fect for operating roller shutters in a single system. Up to 18 roller shutters can
be controlled in the local or central (group) mode. The remote control features
8 buttons, with 6 for operating the controlled equipment and 2 for shift buttons
for switching between button banks. Each button bank features 6 buttons. The
remote control then has 6 button banks, providing a total of 36 buttons (equiva-
lent to channels). You may operate up to 36 receivers in the system independent
of each other. The ergonomic form of the remote control makes operation very
convenient. The integrated magnet is a holder for a quick installation of the de-
vice. The LED ring indicates transmission, active button bank number, and low
battery status. The RF transmission is encrypted for increased control security.
FEATURES
● 36-button (36-channel) remote control
● 6 independent button banks of 6 buttons each
● Controls up to 36 EXTA LIFE receivers independent of each other
● Operates up to 18 EXTA LIFE roller shutter controllers independent of each
other
● Encrypted RF transmission
● Small size and ergonomic silicon buttons with a stylish overall design
● Long operating range (max. 350 m in open areas).
REGISTERING (PAIRING) OF P-456/36 IN EXTA LIFE
You need to register the remote control in the EXTA LIFE system to:
● remotely bind remote control buttons to specific EXTA LIFE receivers (with-
out physical access to the receivers);
● bind specific button(s) to playback scene(s);
● program a remote control button as a condition to execute a logical function.
To register the remote control in the EXTA LIFE system, connect the EXTA
LIFE controller and install the EXTA LIFE mobile app. The transmitters are
saved as registered in the EXTA LIFE system only if they have been success-
fully paired with the EXTA LIFE controller. Procedure:
1. Launch the EXTA LIFE mobile app and open the Devices screen.
2. Select the Transmitters tab and press the “+” button
to start discovering
the remote controls. The discovery takes up to 60 s. You can terminate it
earlier by pressing Stop
. To discover a remote control, press any control
button on it while the discovery is active. If the remote is in range of the
EXTA LIFE controller, it will appear on the
on-screen list with its default icon and name,
which is the remote control model (P-456/36)
with its six-digit ID in the suffix. You do not
need to stop the discovery to register more
than one pilot.
3. Once the discovery has been completed or
stopped manually, check the selection boxes
next to the discovered remote controls on the
list to choose those you want to pair with the
EXTA LIFE controller. You can check more
than one remote control with the selection
boxes. You can use the pop-up menu to mod-
ify a remote control’s name before pairing.
4. Press PAIR
to pair the selected remote
controls. The selected remote controls will
be paired with the EXTA LIFE system after a
short moment and appear in the Transmitters
tab
.
5. A default icon is assigned to each paired re-
mote control.
6. You can pair one remote control at a time;
once PAIR has been pressed, you can assign
a new name to the remote control. When pair-
ing more than one remote control at the same
time, they will be saved under their default
names.
7. You can also modify the default names of the
P-456/36 remote controls once they have
been paired.
8. Only when paired can the remote control be
used to set up the EXTA LIFE system con-
figuration (remote assignment of receivers,
scenes or logical functions).
