※
The specifications of any product may change without prior notice to improve performance.
6
3) AMD Duron/Athlon/Athlon XP/Sempron - 462
①
Installing the Clip Supports for Socket 462
Install the Clip Supports for Socket 462 on the motherboard,
while making sure that their locations are not swapped.
※
The A-type Clip Support must be installed next to the lever.
Install in the order of : Bolts > Small Washers > Motherboard >
Small Washers > Clip Supports.
②
Applying Thermal Grease
Clean off particles and residue then spread a thin
layer of Thermal Grease evenly on the CPU core
(Only on the core’s surface that actually makes
contact with the Block Base).
③
Installing the Grips and Bolts
Interlock the S-type Grips with the Clip.
Insert the two Bolts into the holes of the Grips.
④
Installing the CPU Water Block
Set the CPU Water Block at the center of the CPU.
Screw the Bolts in slightly, then tighten each Bolt a
few turns at a time while alternating between the
two until the Grips are completely pressed against
the Clip Supports.
Clip Support B for Socket 462
Small Washer
Clip Support
A for Socket 462
Motherboard
Bolt
Clip Support B for Socket 462
Small Washer
CPU
Thermal Grease
Bolt
Grip (S-Type)
CPU Water Block
Clip Support for
Socket 462
Grip (S-Type)
