background image

Please read these "Safety Notes" carefully before using the product. 
After reading, please keep this manual in a safe place.

The following marks indicate proper use of the product, and how to avoid injury to
yourself or the product.
Please understand the meaning of each mark before you read the main part of the
manual.

Marks

This mark indicates that improper use may result in serious injury or death.

If the following accidents occur, please stop using the product.

When accidents arise, please contact the customer service center.

Smoke or strange smell comes from the product.

The product is spilled with water, or pierced by a sharp metallic object.

The product is dropped or a part is broken.

Please do not disassemble the product by yourself.

Please do not disassemble or modify the product.

Please do not connect plugs if they are not appropriate for use with this product.

Warning

This mark indicates that improper use may result in damage to the product.

Please note that keeping the product at high temperatures or near a heat source,
such as a stove, or exposed to sunlight, may cause deformation or deterioration of
the product.

When the product becomes dirty after use, please clean with a soft cloth. Do not
use benzene or solvents.

Notice

Please set the volume level of the sound card to a minimum when you start the
program then gradually adjust the volume level to prevent possible hearing damage.  
Prolonged exposure to excessive noise can cause hearing loss. Make sure that the
volume level is kept at a proper level.

Disclaimer)

Zalman Tech Co., Ltd. is not responsible for any damages due to

external causes, including but not limited to, improper use, problems

with electrical power, accident, neglect, alteration, repair, improper

installation, or improper testing.

1

Safety Notes

1

Summary of Contents for ZM-RSSC V2

















Reviews: