4
Installation Procedure (Usage as VGA Cooler)
4. Spring Insertion on the Fixing Nut
Slowly turn the Spring in counter clockwise motion so that theSpring is correctly
attached to the Fixing Nut.
Note 1)
The ends of the Springs are of different diameters. Install the Spring end with the
smaller diameter on the Fixing Nut as shown in the diagram.
Note 2)
Make sure that the Spring is installed perpendicularly and not leaning to one
side.
1. VGA RAM Heatsink Attachment
Remove the film from the Thermal Tapes on the bottom
of the RAM Heatsinks and attach the Heatsinks on the
VGA RAM.
Note 1)
If Thermal Grease or other residue remains on the RAM,
then the Thermal Tapes will not stick. Clean the surface of
the RAM with acetone or alcohol before attaching the
RAM Heatsinks.
Note 2)
The bonding strength of the Thermal Tapes reaches 90%
after 24 hours of curing. Do not exert excessive force on
the RAM Heatsinks during this period.
Note 3)
Thermal Tapes are not reusable because they lose
adhesiveness after their initial application. Purchase new
Thermal Tapes if the RAM Heatsinks need to be
reattached.
※
※
The following installation sequence MUST be followed.
(1. VGA RAM Heatsink Attachment
→
2. Thermal Grease Application
→
3. Nipple A Installation on Retention
Guide
→
4. Spring Insertion on the Fixing Nut
→
5. VGA Cooler Installation
→
6. VGA Card Installation
→
7. Fan
Power Cable Connection)
2. Thermal Grease Application
Clean the contact surface of the VGA Chipset completely.
Apply a thin and thorough layer of Thermal Grease on the
VGA Chipset that makes contact with the base of the
VGA Cooler.
3. Nipple A Installation on the Retention Guide
Install the short end of the Nipples A on the VGA Cooler’s
Retention Guide after determining the appropriate
Installation Holes.
(Note)
The Nipples MUST be tightened by hand. Using tools to
tighten the Nipples may damage the tips of the Nipples.
※
Cards with less than four installation holes, or with a diagonal
installation hole distance that is not 75.2mm are not compatible .
※
Please check the table below to identify the correct Nipple installation
Holes for specific models of VGA cards.
Section
Radeon HD 4870 Series
Radeon HD 4850 Series
Radeon HD 4830 Series
Radeon HD 3870 Series,
Radeon HD 3850 Series
Radeon HD 2600XT(DDR4) Series
Radeon X1950 Series
Radeon X1900 Series
Radeon X1800 Series
Geforce 9800GT Series
Geforce 9600GT, GSO Series
Geforce 9500GT, 9400GT Series
Geforce 8800GT, GS, GTS(G92) Series
Geforce 8600GT, 8500GT Series
Geforce 7950 Series(except GX2)
Geforce 7900, 7800, 7600 Series
Geforce 6800, 6600 Series
(except 6600 AGP Series)
Quadro FX Series
(except 4600, 4700X2, 5600 Series)
NVIDIA
Compatible
VGA cards
AMD(ATI)
