1) Brace Plate
2) Screwdriver
3) Bolt 'B'
4) Nipple ‘B’
6.2) Install the Brace Plate
Use each Bolt 'B' to attach the
Brace Plate to each Nipple ‘B’ as
shown in the diagram.
6.3) Attach the VGA RAM Heatsinks
Remove the Film from the Thermal Tapes
on the bottom of the RAM Heatsinks and
attach the heatsinks on the VGA RAM.
3) RAM Heatsink
4) VGA RAM
5) Nipple ‘A’
6) VGA Chipset
1) Thermal
Tape
2) Film
Note 1)
If Thermal Grease or other residue remains on the RAM, the Thermal Tapes will not
stick. Clean the surface of the RAM with acetone or alcohol before attaching.
Note 2)
The bonding strength of the Thermal Tapes reach 90% after 24 hours of curing.
Do not put excessive force on the RAM Heatsinks during this period.
Note 3)
Thermal Tapes lose adhesiveness after they have been used for attachment once
and cannot be reused. New Thermal Tapes should be purchased for later
reattachment.
6.4) Apply Thermal Grease
Clean the contact surface of the VGA
Chipset completely. Apply Thermal
Grease on the VGA Chipset’s core
that makes contact with the base of
the FHS Assembly.
1) Thermal Grease
2) RAM Heatsink
3) Nipple ‘A’
4) VGA Chipset
