![ZALMAN CNPS7X User Manual Download Page 6](http://html1.mh-extra.com/html/zalman/cnps7x/cnps7x_user-manual_3170711006.webp)
5
.COM
④ Install the cooler on the Clip support as shown in the picture and connect
the lug slot of the clip on to the lug on the clip support. Then fasten the
bolts on each side a few turns at a time.
⑤ Connect the cooler’s 4-pin connector to the motherboard’s CPU Fan Header.
When reassembling the bolt, be sure
to assemble only half way of the total
length.
Tip
<Performance Mode>
<Low-Noise Mode>
Fan RPM resistor
M/B
M/B