* The specifications of any product may change without prior notice to improve the performance thereof.
5
5. Slightly unscrew the Bolt-B on the Air Duct and turn the top part of the duct to the left or right so
that the duct faces the exhaust fan as shown in Fig. 8. Then, screw in three Bolt-B’s tightly to hold
its position.
Caution) If the Air Duct cannot face the exhaust fan as shown in Fig. 8 even after turning
the duct fully, separate the duct from the Air Duct Base, make appropriate adjustments
to the direction of the duct, and reassemble the duct. See Figs. 2 and 9 for a better
understanding.
6. Connect FAN MATE 1 to the mainboard & the fan as shown in Fig. 10.
<Fig. 10. Connecting FAN MATE 1>
<Fig. 8. Adjusting the Air Duct>
<Fig. 9. Assembling the Duct>
3-Pin Connector
Mainboard
FAN MATE 1
Speed Control Knob
3-Pin Connector
(from CNPS 5700D)
Adjust
Driver
Exhaust Fan
Bolt-B
