3 |
P a g e
Charging ports: There are two different connection available to fill with compressed air the top
cavity of your BPR-1000:
1)
Specialty fitting specifically selected for the BPR-1000 that contains a valve to seal off the
device once fille dup with compressed air. The dedicated connector is provided with the
device.
2)
1/8” Swagelok fitting port. This port comes capped, it does not include a valve and it is
recommended for permanent installations or during dynamic set point operations (see
below)
Process fluids connections
: Ports are designed to accommodate ¼’’ OD tubing (typically PFA or
FEP) with the Swagelok PFA ferrules and the Nuts supplied with the device. Swagelok ferrules are
part# PFA-424-1 (back ferrule) and part# PFA-423-1 (front ferrule).
Please refer to Swagelok documentation on how to correctly use their ferrules
https://www.swagelok.com/downloads/webcatalogs/EN/MS-01-05.PDF
