IM1 M/S INSERT MASTER
IM1 Preliminary Manual 10.2017
www.zaehl.com
Page 1 of 7
...another AM1 spin-off in the 500 series format
AM1 is our state-of-the-art pure analog mixing console delivering superb sound quality and comprehensive func-
tionality.
IM1 packs the functionality of the AM1 INSERT and STEREO stages and several added controls into a 2-slot 500
series module.
TYPICAL APPLICATIONS AND BENEFITS
IM1 provides extended options when inserting out-
board analog signal processors into your audio chain
for post-processing, mastering, mixing or recording -
whether in an analog or digital environment (with
ADDA conversion).
In mid/side or conventional left/right stereo modes it
offers control over gain, drive, impedance, stereo
image and dry/wet balance for parallel processing at
high end sound quality.
FEATURES
•
Switchable stereo INSERT with optional MID/SIDE
mode
•
SEND BOOST up to +20 dB
•
DRY/WET RETURN RATIO control
•
Selectable impedance on RETURN (600R, 2k, line)
•
STEREO BASE (width) control switchable between
MID/SIDE and CONSTANT MID mode
•
GAIN (±10 dB) and L/R BALANCE (±2.5 dB) com-
pensation on INPUT and OUTPUT
•
SIGNAL/OVERLOAD meter LEDs at INPUT and
OUTPUT
•
MONITORING of SEND and RETURN signals
•
BYPASS
CONNECTIONS
IM1 is a 2-slot 500 series module with stereo input, stereo output and stereo
insert send and return.
When installed in a Zähl Rack500 a dedicated rear
panel provides all connec-
tions (8 XLR connectors).
As the 500 series standard provides only one balanced I/O per slot, the en-
closed additional breakout panel with 4 XLR connectors is needed to operate
IM1 in a standard 500 series rack - requiring one additional slot. Please read
installation guide below.
