Rev. 5
16/04/2009
This document substitutes previous versions.
Page 3 of 12
Zaehl Elektronik-Tontechnik • Odenthaler Str. 47 • D-51465 Bergisch Gladbach • Germany • [email protected] • www.zaehl.com
Distributor (National/International):
sono Studiotechnik GmbH • Haagerstraße 5 • D-81671 München • Tel. +49 89 419671-0 •
•
www.sono.de
ASD-8 Manual
1.
Important Notes and Safety Instructions
Before unpacking and operating the equipment read these Notes and Safety Instructions carefully.
More notes and instructions can be found in the following chapters of this manual. Follow all notes and
instructions.
The term „equipment“ stands for the ASD-8 unit as well as the provided power supply.
1.1.
The equipment must only be used for the purpose described in this manual.
1.2.
Keep the manual for further reference. When passing the equipment on, enclose the manual.
1.3.
Do not operate the equipment at
-
very high air humidity (>85% relative humidity)
-
high ambient temperature (>40°C) or in the vicinity of heat radiating equipment or objects
-
places which are exposed to solar radiation
-
at very low temperatures (<5°C)
1.4.
Ensure appropriate air ventilation.
1.5.
Do not block the ventilation slots of the equipment. Keep free a minimum of 20mm around the
equipment.
1.6.
When rack-mounting the unit, always provide slide bars to prevent excessive strain of the front panel by
transport shocks or cable & connector weight.
1.7.
Do not store the equipment at temperatures below -20°C or above +50°C.
1.8.
Do never expose the equipment to environmental conditions which can lead to the incidence of
condensation water.
1.9.
Do not expose the equipment to mechanical stress or shock.
1.10.
Ensure that liquids cannot get into the equipment.
1.11.
Ensure that foreign objects cannot get into the equipment.
1.12.
Only clean the equipment with smooth cleaning tissues and soft detergents.
1.13.
Never open the equipment.
1.14.
Only operate the unit with the provided power supply. When operating with other power supplies,
warranty will be void.
1.15.
In case the equipment has been dropped or there is any external or functional damage, do not continue
to operate the equipment. Have the equipment checked at your dealer’s workshop or a person who is
qualified to do such checks.
1.16.
Only connect the equipment to a legally approved, earthed, mains power supply.
1.17.
In case of any damage of mains cable or power supply there is the risk of a perilous electrical shock!
Replace the mains cable immediately. Have the power supply checked or replace it. Regularly check
mains cable and power supply for any damage.
1.18.
When shipping, use a package which protects the equipment from environmental impact such as
mechanical shock or humidity.
1.19.
The equipment applies to EU directives RoHS and WEEE. Disposal has to be carried out according to
WEEE. As this equipment is classified as professional equipment for industrial use (B2B), manufacturer
and purchaser conclude the following agreement: According to ElektroG §10 Abs. 2 Satz 3 (ref. to
German/EU law) the manufacturer takes over the disposal if the purchaser sends back the equipment at
his own expense. Alternatively the purchaser disposes of the equipment according to WEEE at his own
expense. In case the purchaser passes on or sells the equipment, this agreement has to be passed on.
Manufacturer WEEE register number: DE 90586269
