The ZAGI-400 X Complete Kit Electric Wing Kit contents:
2
Expanded polypropylene (EPP) leading edges
laminated to 1# white foam wing panels and beds
2
Pre-cut balsa elevons
2
24’’ strips of 1’’ x 3 mil paper backed Mylar hinge tape
1
Roll 2.2 mil color poly tape
2
Control horns with 4 screws
2
Threaded 2 X 56 push rods
2
Threaded 2 X 56 clevises
1
Carbon fiber spar
2
Die-cut clear winglets
1
Molded motor mount and battery tray
1
Molded canopy
1
Speed 400 motor and prop
1
Zagi 20 Electronic Speed Control (ESC) with Battery Eliminator Circuit
(BEC)
1
8 cell 1700 mAh battery with Deans Ultra plug
2
Wire ties to secure motor
4
Velcro strips for canopy and battery hold down
1
Deans Ultra plug with red and black leads (for charging the battery)
page 3
(See Figure 1)
Separate the top and bottom beds from the wing cores. Lightly block
sand the wing panels (cores) with #150 or #320 paper and round the leading edge (LE).
Beds
Wing Core
Figure 1
Needed Components
1
Radio Transmitter (TX) 3 channels w/mixing
1
Receiver (RX)
2
Micro servos are recommended (approximately .65 ounces)
Summary of Contents for 400 X ELECTRIC
Page 2: ......
Page 22: ...Zagi is a registerd trademark of Trick R C Products LLC...