®
1. Make sure your device's Bluetooth connection in enabled. You
can do this on many devices by accessing the SETTINGS menu,
and then choosing GENERAL BLUETOOTH ON.
2. Press and hold the power button until you hear the power up tone.
The LED above the power button will light blue and flash every
seven seconds indicating the Exchange is on.
3. Select “ZAGG Exchange” in your list of available Bluetooth
devices. A tone will sound to indicate your Exchange has paired
successfully.
NOTE: When powered on, the Exchange speaker automatically
begins searching for devices to pair with. If no device is
discovered it will enter pairing mode and the LED above the
power button will alternate flashing red and blue for two minutes.
If no device is found after two minutes, the Exchange will enter
standby mode for three minutes and then begin pairing again.
This cycle will continue for fifteen minutes, or until the Exchange
pairs with a device. If it has not paired after fifteen minutes, the
Exchange speaker will automatically power off.
4. When you are ready to turn your ZAGG Exchange speaker off,
simply hold the power button for three seconds, or until you hear
the power off tone.
