Zagg Keyboard Case, Instructions Manual

Page: 2 / 20

INSERTING/REMOVING YOUR G Pad
INTRODUCTION
To insert your G Pad into the Keyboard Case open the cover
and position the Keyboard Case so that its keyboard is facing
you. Then, with your G Pad in landscape mode and the volume
controls facing up, set the bottom half of your tablet in the
cover. Ensure your G Pad is settled on the cover’s bottom (you
may need to apply light downward pressure on your tablet).
Next, snap the top half of your tablet into the cover. You should
be able to feel when your tablet is secured. Check all of your
tablet’s corners to make sure they have seated properly.
To easily remove your G Pad, simply open the cover and apply
a light pressure to the back of it. This will unseat your G Pad
enough for you to grab its edge. Grasp your tablet’s exposed
side and lift/pull it out of the cover.
Congratulations on being the proud new owner of the ZAGG Keyboard Case,
made exclusively for the LG® G Pad®. The Keyboard Case has been designed
to make your mobile typing needs fast and easy. Its spacious keyboard layout
and island-style keys give you the room you need to type naturally, with fewer
typos. And with its full-body protective case that doubles as a stand, you can go
anywhere knowing your G Pad is safe and ready for work and play.
1
POWERING ON AND OFF
To turn your Keyboard Case on, press the
Power button located in the upper right corner
of the keyboard. A blue LED will illuminate
briefly while the keyboard powers up. To turn
your Keyboard Case off, simply press the Power
button again.
POWER BUTTON