PAIRING YOUR ZAGG Folio
Pairing your Folio with your tablet is easy. It should only need to be paired once
using the following directions. If the connection between your tablet and Folio is
ever lost, repeat these steps.
1. Ensure your tablet’s Bluetooth® settings are on.
2. Press the Bluetooth key on your Folio keyboard. A
blue LED under the Power key will flash until your
Folio and tablet are paired.
3. Your tablet will display the keyboard serial
number as an available device. Select this
option to complete pairing. Once paired, your
tablet will display “ZAGG Folio” in place of the
serial number.
CHARGING
Your Folio features a powerful lithium polymer battery that lasts for up to one
year of normal use between charges*. It comes with a charging cable you can use
to charge your keyboard quickly and conveniently. To charge your Folio, follow
these steps:
1. Plug the micro USB connector into the charging port.
2. Plug the regular USB connector into any 5V USB outlet.
3. The red Power key will illuminate to indicate your Folio is charging. Wait until
this light turns off, indicating a full charge. It usually takes two to four hours
to completely charge your Folio.
4. Remove the micro USB connector and enjoy your Folio for up to one year
before you need to charge it again.
5. If at any point your Folio begins to perform strangely, reset it’s system by
charging it.
* Normal use is approximately one hour of
use per day without the backlit feature.
Using the backlit feature will impact battery
life and will require more frequent charging.
CHARGING PORT
2
