Zagg Basic 7in, Manual

Page: 15 / 36

Critical Level is achieved (0%~11%) a RED LED
will flash three times, one flash sequence every 5
minute. (1 Hz Flash 50% Duty)
Bluetooth Pairing Blue LED under
power key
Push and hold Pairing key for 3 seconds for
pairing. A
BLUE LED under power key will Flash
when pairing. Flash will stop flashing when
paired. Pairing times out after 60 sec.

Caps Lock:
Function LED Colour Remark
Caps Lock ON Blue LED under
Caps Lock Key LED Stay on until key is pressed again

Tablet Bluetooth Display
Function Name Remark
Display in Bluetooth
settings ZAGG Basic Folio Zagg Basic will show in the display of Bluetooth
devices the tablet detects
Note: Now the turning ON and OFF of the keyboard through the key frame is really only
toggling between Hibernation Mode and Active Mode and disconnecting Bluetooth
connection when in Hibernation Mode.
To perform a HARD RESET, a micro USB cable needs to be plugged into a 5V power source
and then plugged into the keyboard. A GREEN LED under the power key will come on for 2
seconds then changes to RED indicating the PCBA has been reset.
For all flashing of LED’s a flash cycle time 1 Hz Flash 50% Cycle will be used.
3.5. RF Specifications
Simple data transmitter operation at 2.4GHz range
Modulation: FHSS
Caps Lock ON: Blue light
Voltage (Supply): 3.0V
Transmitter Output Power: 2.66 dBm
Receiver Sensitivity: - 86.14 dBm
Range: >= 10m (in no interference environment)
Auto paring: Device starts auto pairing mode after power on,
and leaves after 60 seconds.