4
SWITCHING ON
SWITCHING OFF
DIMMER FUNCTION
INSTRUCTIONS FOR USE
CHARGING MOBILE DEVICES
This function can only be used with LD0611B3 and LD0611N3 models
**Warning: DO NOT connect mobile devices if the lamp is being charged
INDICATOR LEDS
CHARGE
Quickly press the touch sensor to
switch on the lamp
Lift up the silicone flap
Insert the USB port cable
Connect your mobile device
Quickly press the touch sensor
to switch off the lamp
When the lamp is switched on, lightly press
the touch sensor to obtain the
desired brightness. Every time you turn it
on, the light intensity returns to 100%
PERMANENT BLUE LED
the battery is charged, it is
advisable to disconnect it
from the power charger
FLASHING BLUE LED
charging in progress
For more information and updates visit our website
DESIGNED BY ZAFFERANO SRL IN ITALY, MADE IN PRC
Zafferano srl, Viale dell’Industria, 26 - 31055 Quinto di Treviso - TV - Italy
www.zafferanoitalia.com
<1 sec
<1 sec
CHANGING THE COLOUR TEMPERATURE (2700 - 3000 K)
on / off
x 5
Turn the lamp on and off 5 times in succession;the 5th time you turn
it on (10th touch), the colour temperature will be changed.
N.B. No more than 5 seconds must elapse between one touch and the next
GREEN LED
the mobile device is being charged.
This function can only be used with
LD0611B3 and LD0611N3 models**
1
2
3
Charge the battery before initial use.
To correctly charge the lamp, we recommend that you:
1) Connect the USB cable to the adaptor;
2) Put the plug into the electrical socket
3) Place the lamp on the charging base;
4) When fully charged, disconnect the plug
from the electrical socket
1-2
3