Safety Information
• Carefully read through the operating manual before using the
Eye & Temple Massager.
• Do not use this product while bathing or around water. Do not
immerse in water or expose to high humidity.
• This product should not be dropped. Please avoid exposing
this product to strong sunlight or corrosive gas.
• Eye & Temple Massager covers the eyes so it cannot be used
while driving, walking, or in any situation where vision cannot
be obstructed.
• Contact lenses must be removed from the eyes before using
the Eye & Temple Massager.
• Place the product properly over face and eyes before turning
on the product.
• After using the Eye & Temple Massager, keep your eyes
closed for 1 to 3 minutes before opening. Then open slowly
after use.
• Use alkaline batteries or AC adapter. Do not take out batteries
when you are using adapter.
• In case of mechanical malfunction, please contact the
manufacturer. The warranty is voided if the product has been
dismantled or tampered with.
Do not use this product in the following situations:
• When wearing contact lenses.
• If any medical concerns or when medical conditions contradict
use of this product such as glaucoma, retinoschisis, or other
eye diseases, eye problems or medical issues, please contact
your physician prior to using this product.
• Check eye mask and hose regularly. Do not use this product
in the case of a broken or fractured eye mask or cable.
Product Setup
Battery installation
1. Open the battery cover of the controller and insert 4 AA
batteries properly.
2. Close the battery cover of the controller.
Caution:
Check the direction of the batteries. Install the batteries
correctly; check the battery cover and keep it secure.
Adapter installation
1. Connect the adapter with AC power jack properly.
2. Plug the DC PIN into the DC jack of the controller.
