Set the BSP-6210 and your Bluetooth headset to pairing mode, these two
devices will start to pair automatically. If pairing is completed, blue LED will
flash four times in every two second.
Pairing Password:
---
■ Specification
●
Receiver Sensitivity: -85dBm @ 0.1% BER
●
Class 1 RF Output Power:
＜
+20dBm
●
Class 2 RF Output Power:
＜
+4dBm
●
Operation Range: Class 1 up to 30m
；
Class 2 up to 10m
●
Audio Output Power: 5W x 2 (RMS)
●
Frequency Response: 150Hz ~ 20KHz
●
Speaker: 2 inch x 2
●
Dimension (W x H x D): 280 x 150 x 100 mm
■ Important Notes
1. Away the unit to a place of moisture or dusty
2. Do not expose the unit to rain or sunlight
3. Do not impact or fall the unit
4. This unit only in simply anti-magnetism design, always place beside display, you can
disposal as below steps if disturbance happen:
First press the display power switch OFF, put this unit power ON for 15~30 minutes,
then press the display power switch ON again, enlarge the distance between unit and
display, until the disturbance do not be happened no more.
5. Make sure that the power supply is proper and audio wire connection alright before
power ON.
■ Accessory
1. Build in Bluetooth function 2.0 or 2.1 CH speakers
2. Audio wire X 1
3. User Manual X 1
4. Warranty Card X 1
4
