Z3 Technology Z3Stream-SDI-01 User Instructions Download Page 44

Page: 44 / 55

Z3Stream-SDI User Instructions

DOC-USR-0117-01

___________________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

Z3Stream.com

9.4

The Encoder Tab

Parameter

Options (default in bold) Description

Encoder Setup

Video Source

HD-SDI

HDMI

Composite

The video source selected for encode.

Selecting

HD-SDI

also supports 3G-SDI resolutions.

16:9

Checked

Unchecked

For any SD resolutions (NTSC, PAL), the default
output aspect ratio is 4:3. Checking this box forces
the output aspect ratio to be 16:9.

This checkbox is not applicable for HD resolutions.

Encode Quality

Full HD

High

Medium

Low

Mobile

CBR

Custom

The quality and resolution of your output stream.
See

Error! Reference source not found.

for details

on each option. If this resolution is different from
the source resolution, resizing will occur.

CBR

(Constant Bitrate) means that a stable

encoding bitrate is ensured within the bitrate
statistical time. This option is included under

Encode Quality

as quick access to recommended

settings for RTMP streaming. When selected,

Video

Resolution

and

Video Bitrate

will appear. Please

see the descriptions of these options below.

Custom

is selected, additional configuration

options will appear. Please see the descriptions of
these options below.

Video Resolution

(CBR Only)

352x240 – 1920x1080

Follow Input

The encode resolution. If this resolution is different
from the capture resolution, resizing will occur.
“Follow Input” generates the resolution based on
the capture resolution. [

Note 1

]

Summary of Contents for Z3Stream-SDI-01
























































Search results

Summary of Contents for Z3Stream-SDI-01

Reviews:

Related manuals for Z3Stream-SDI-01

Brands by name

Popular brands

Z3 Technology Z3Stream-SDI-01, User Instructions

Search results

Summary of Contents for Z3Stream-SDI-01

Reviews:

Related manuals for Z3Stream-SDI-01

Brands by name

Popular brands