Z3Cam-4K Software Update Instructions
DOC-USR-0105-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
3
1.0
GETTING STARTED WITH Z3Cam-4K
This section gives step-by-step instructions on using your PC to access the Z3Cam-4K user interface. Here
you’ll be able to change the settings to fit your video streaming needs. In addition to the Z3Cam-4K, a
Windows PC, a 12V power supply and an Ethernet cable are required.
1.1
Connect and Power Up the Camera
(1)
Connect an Ethernet cable directly from your PC to
Ethernet
on the back of the camera to a
switch, router or other DHCP server on the same network as your Windows PC.
(2)
Connect the 12V power supply to
+12V
on the camera and plug into a power outlet.
If Power over Ethernet (PoE) is available, then no connection to the power supply is required.
It will take 15-30 seconds to boot.
1.2
Access the User Interface Using ZFinder
ZFinder is a PC utility that allows you to find any Z3 Technology product on your network. If you have
not yet downloaded this to your computer, you can find it on the USB drive provided with your system.
(3)
Verify your PC is set to DHCP. If it is set to a static IP address, ZFinder will be unable to discover
your camera.
(4)
Run the ZFinder PC utility on your PC. You may need to allow it past any firewalls or security
programs on your PC. The ZFinder window appears and completes a scan of the network. ZFinder
then lists all Z3 systems connected to the network. The Z3Cam-4K appears.
(1) Connect to
Ethernet
(2) Connect to
12V Power
Figure 1 Streaming and Power Connections