DOC-USR-0077-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
36
9.5
The CH1 Tab (Decode Options)
Parameter
Options (default in bold)
Notes
Input Interface
RTP
UDP
TSFILE
FILE
Where to get input for channel 1. See the
description in “Output Format” in the
Encode section for details.
Address
x.y.z.w
(225.1.2.3)
The IP address that the decoder retrieves
data from (used when “RTP” or “UDP” is
selected for the Input Interface).
Port
0 – 9999 (
8888
)
The port the decoder retrieves data from.
Location
/media/sda1/4kdemo.ts
When TSFILE or FILE is selected, this is used
to specify the location of the file.
Max Video Lag (ms)
0 – 2000 (
275
)
The maximum allowed offset between audio
and video. Increasing this allows more files
to play back successfully, but can also mean
a more discernible A/V lag. It is generally
recommended to keep this value at 275.
Audio Output
On
/ Off
Set to “Off” for video only streams.
Output Port
AUTO,
HDMI
Where to output audio. Only HDMI
supported in the Z3-HE4K-R.
9.6
Values Appearing at the Bottom of All Tabs
Parameter
Options (default in bold)
Notes
preset
serial_menu
encoder factory default
(any user-defined profiles)
The configuration file to use.
serial_menu = Last value saved in GUI
encoder factory default = Factory settings
Can also add more profiles by clicking on “new”
in the User Presets tab.
Save
Click on this to save preset value to what was
selected.
Operating Mode
Encoder UltraHD
Decoder
This selects how the HE4K-R is being used.
