CONFIDENTIAL
DOC-USR-0030-13
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
40
8.0
STREAMING RTMP IN THREE DIFFERENT RESOLUTIONS
This section shows how to use the Z3-DM8107-SDI-RPS to take 1 video input and stream it over RTMP into
three different resolutions (720p, D1, and CIF). The Wowza server is used as an example RTMP server.
These instructions can also be used to determine how to stream the same input into multiple
configurations. Simply specify “RTP”, “UDP”, or “TSFILE” instead of “RTMP”, and ignore the sections
referring to Wowza in this section. Note that, if multiple channels off the same input is done, the total
performance cannot exceed the capability of the Z3-DM8107-SDI-RPS (up to the equivalent of 1x 1080i
1x 720p encode is supported).
8.1
Connect the Encoder
(1)
Follow steps (1) to (11) in Section 7.0 to connect the Z3-DM8107-SDI-RPS for encode and bring up
the Encoder GUI.
8.2
Configure the Encoder to “Encode 1 to 3 Ch” Mode
(2)
At the Operating Mode select towards the bottom, select “Encode 1 to 3 Ch”:
(3)
Two channels can be configured. To create a third channel, click on the “+” to the right of the CH2
tab:
Figure 35 Changing to “Encode 1 to 3 Ch” Mode
(1)
Change here to
“Encode 1 to 3 Ch” Mode
Click on “+” to create CH3
Figure 36 Creating CH3
