CONFIDENTIAL
DOC-USR-0030-13
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
24
(11)
Click on the “CH1” tab.
(12)
At the CH1 tab, change Video Resolution to “1920x1080”, set “Output Format” to UDP and “Dest
Address” to the IP address of your PC (in this example, 192.168.0.6). Also make note of the value
of “Dest Port” (should be 5004 by default):
(13)
Click “start”. The status should change from “IDLE” or “STOPPED” to “RUNNING”
-The encoder automatically starts 20 seconds after booting up. If it has already started, it may be
necessary to click “stop” before clicking “start.”
*
Note
:
If you want to encode 1080p60, you must first change “Operating Mode” at the bottom right
from “Encode Interlaced/Progressive” to “Encode Single Ch No Scale.” Note that, in “Encode Single
Ch No Scale” mode, only CH1 can be used.
Figure 8 Channel 1 Configuration Screen – UDP
(2) Change
to UDP
(3) Change to IP
Address of your PC
(1) Change to
“1920x1080” or
“Follow input”
(4) Note “Dest Port”
value
(6) Click “start”
(5) Click “stop” (if
necessary)
