Z3 Technology Z3-DM368-ZDVR User Manual Download Page 25

Page: 25 / 33

CONFIDENTIAL

Z3-DM368-ZDVR V1.03.01

___________________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

Status result:

7.4 media

Reports the general status of the media. No arguments are accepted.

Command Syntax:

media

Parameters:

None

Status result:

7.5 space

Returns the mounted device name, size, space used, and the available space left on the selected
device, in KB.

Command Syntax:

media

Parameters:

None

Status result:

“+Released”

Success. Device has been released and it is now safe to
remove.

“+{block_device}”

Success. Device is mounted and ready to use.

“!Device not found”

Error. Could not find the specified device. Is it plugged in?

“!No device mounted” RELEASE parameter specified but no devices previously

mounted.

“!Device busy”

Attempted to RELEASE a device that is currently busy.

“!Error”

General error. More detailed information may follow.

“+READY”

Device is mounted and ready to use.

“!No device mounted” RELEASE parameter specified but no devices previously mounted.
“!Error”

General error. More detailed information may follow.

“+{block_device} {s} {u} {a}” Device information. s=size, u=used, a=available
“!Device not found”

Error. Could not find the specified device. Is it
plugged in?

“!No device mounted”

No device mounted with “storage”.

Summary of Contents for Z3-DM368-ZDVR


































Search results

Summary of Contents for Z3-DM368-ZDVR

Reviews:

Related manuals for Z3-DM368-ZDVR

Brands by name

Popular brands

Z3 Technology Z3-DM368-ZDVR, User Manual

Search results

Summary of Contents for Z3-DM368-ZDVR

Reviews:

Related manuals for Z3-DM368-ZDVR

Brands by name

Popular brands