43
CONFIDENTIAL
DOC-USR-0049-03
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
D1 Sharpness
(For Composite Input
Only)
0
-2
Controls the peak and coring filters of the
analog front end for D1. 0 is a normal
(flat) setting. 2 causes the highest
sharpness gain. The encoder will encode
more efficiently with less sharp pictures.
If the bit rate is pretty high, this can be
used to enhance the picture quality. The
general recommendation is to leave this
at 0.
Output Interface
Ethernet(VBR)
Ethernet(CBR)
Selects between VBR and CBR Ethernet.
RTP requires VBR. For UDP, specifying
“CBR” will cause insertion of null packets
where necessary.
Output Format
RTP
MPEG-2 TS
MPEG-2 TS RTP
RTMP
Output format of encoded stream. Note:
RTP requires an SDP file for the receiver.
“MPEG-2 TS RTP” sends an RTP stream
encapsulated with MPEG-2 TS. RTMP is
not supported in this release.
Dest Address
192.168.x.y
(192.168.0.6)
The IP address that the encoder is
streaming to.
Dest Port
0 – 9999 (
8888
)
The port that the encoder is streaming to.
TS Bit Rate
(for MPEG-2 TS)
0 – 16000K (
12000K
)
The overall bit rate for the generated
transport stream if “MPEG-2 TS” or
“MPEG-2 TS over RTP” is selected. A
margin of 30-50% over the video bit rate
for high bit rates is recommended.
PID Audio, Video,
PCR (for MPEG-2 TS)
0 – 999 (
120, 220, 520
)
The PIDs assigned to audio, video, and the
PCR in the TS stream. Values are
separated by a space.
Stop Encoder
[Button]
-----
Stop current encode session.
Start Encoder
[Button]
-----
Start encode session.
Status
Idle
, Stopped, Running
Current status of the encoder.
Note 1: Encode Resolutions Supported:
WQVGA (320x180), QVGA (320x240), SIF (352x240), CIF (352x288), 2-SIF (352x480), 2-CIF (352x576),
640x360, VGA (640x480), 4-CIF (704x576), PAL PAR 12:11 (720x576 w/16:9 aspect ratio),
D1 PAL (720x576), D1 NTSC (720x480), 16:9 PAL (1024x576), 4/5 720p (1024x720), 720p (1280x720),
3/4 1080i (1440x1080), 1080p (1920x1080), and 1080i (1920x1080)
“Follow input” = Generate encoder resolution based on capture resolution detected
