13
Z3
C
on
fid
en
tia
l
DOC-USR-0269-08
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
5.1
Supported Input Resolutions - Encoder
HDMI/KEL:
2160p30, 1080i60, 1080p60, 1080p59.94, 1080i50, 1080p50, 1080p30, 1080p29.97,
1080p25, p1080p24, 1080p23.98, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25,
720p24, 720p23.98, 576p50, 576i25, 480p60, 480i30, and 480i29.97
Composite: 576i25, 480i29.97
3G-SDI (-SC ONLY): 1080p (up to 60fps), 720p, NTSC/PAL, VGA, CIF, and QVGA
Note:
Interlaced inputs will be encoded as progressive by default; see section 7.2.1 for Encoding HEVC Interlaced
Streams.
* Supports non-HDCP HDMI content only. For example, Blu-Ray players cannot be used as a video source.
6.0
RS-485 Pin Information
(Pin 1 is noted by a blue triangle in the Q603-SC figure above)
Pin 1 RS485 A (RS422 TX A+)
Pin 2 RS485 B (RS422 TX B-)
Pin 3 RS422 Z (RS422 RX B-)
Pin 4 RS422 Y (RS422 RX A+)
Pin 5 GND
Pin 6 RS232 RX
Pin 7 RS232 TX
7.0
WIFI ANTENNA, J5 (Only applicable to Q603-10W)
J5 is a low profile UMCC/MHF type connector intended for connecting an external WiFi antenna. This
connector is located on the Q603-MOD (PCB-0101-20) on the Q603-10W. The module does not have an on-
board antenna for the WiFi, so one must be connected here if the WiFi function is to be used. The connector
placed is a Taoglas RECE.20279.001E.01 receptacle.
Figure 6 WiFi Antenna connection
