HE4K-DCK-1X User Instructions
DOC-USR-0123-06
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
72
44100 Hz
32000 Hz
16000 Hz
Bit Rate
12 – 384 Kbps
(128
Kbps)
Target bitrate for audio encode.
The bitrate range for AACLC is 12-384
Kbps (though 64 Kbps or higher is
recommended for best results). The
bitrate range for AACHE and AACHE V2
is 32 – 64 Kbps.
Source
MIC Line-In
MIC
Select
MIC Line-In
when using a non-
powered/non-amplified microphone.
Select
MIC
when using a
powered/amplified microphone.
Rtp Port (RTP Only)
0 – 9999 (
8700
)
Destination port for RTP audio.
Pid
*
(UDP/TSRTP/TSFILE Only)
0 – 8191 (
120)
Audio PID for transport stream.
Max PTS-PCR
*
(UDP/TSRTP/TSFILE
Only)
0 – 8191 (
250)
Maximum difference between the PTS
and PCR in the audio stream. It is
generally recommended to leave this
value at 250. Certain decoders may
require a value similar to the video
delay. If an issue is encountered with a
specific decoder, try setting this value
to the same value as the video delay.
Output Setup
Output Format
RTP
RTSP
UDP
TSRTP
TSFILE
RTMP
RTMPS
Output format of the encoded IP
stream.
RTP requires an SDP file for the receiver
that corresponds to the video codec
used.
TSRTP streams TS over RTP.
RTMP is only supported with H264(AVC)
selected as the Video Codec.
