VISCA Camera Control Instructions
DOC-USR-0115-01 DRAFT
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
7
2.3
Com2TCP Setup
(1)
If you have not already done so, install the Com2TCP application onto your PC. (Windows 7 is
supported. Windows 8 or 10 are not recommended.) Com2TCP is an application supporting remote
access and is available online.
(2)
Launch the Com2TCP application.
(3)
Set the
Remote IP
field to the IP address of your Z3 unit. This can be found using ZFinder or as
the URL of the web browser with the user interface open.
(4)
Set the
TCP Port
to
1000
.
(5)
Assign a
COM Port
that is not currently in use on your system using the dropdown menu.
(6)
Click the
Connect
button. The application will minimize. Do not close this application while your
camera control is in use.
The COM port selected will now redirect data to the Z3 unit.
Figure 3 Com2TCP Configuration
Set to “1000”
Set to the IP
Address of
Your Z3 Unit
